Ghost Hunting Paranormal Equipment Tester Lcd Digital Black Magnetic Field Detector Radiation Dosimeter Portable Led Emf Meter
Description:
Shell Material: ABS
Detection Range: 0~20+milliGauss
Detection Frequency: 50/60Hz (50~1000 Hz-ELF) (1000~20.000Hz-VLF)
Accuracy: 5%(typical)
Operating Temperature: 0~120° F(-18~49°C)
Battery Requirements: 9 Volt battery (not included)
Features: keep you away from radiation, which is good for your health
Specifications:
The EMF Meter is a compact and easy-to-use Magnetic Field strength meter. The EMF Meter can be used indoors or outdoors for measuring any electric device or power lines. There are 5 LEDs, each representing a field strength range as follows.
GREEN: “Normal” zone-Normal background Magnetic Field
0 to 1.5 milliGauss
GREEN: “Low”zone-Low-Level Magnetic Field
1.5 to 2.5 milliGauss
YELLOW: “Caution” zone-Mid-level Magnetic Field
2.5to 10 milliGauss
ORANGE: “High” zone-High-Lovel Magnetic Field
10 to 20 milliGauss
RED: “Warning” zone-Extremely High Magnetic Field
20+milliGauss
OPERATION
1) Hold the EMF METER with your thumb on the switch
2) Point it toward the EMF source, then depress and hold down the switch (a short flash of the LEDs will occur)
3) The LED will indicate the range of the EMF at that level
4) Moving the device from side to side or rotating it may change the reading, the highest reading is most accurate
5) Move closer or further away to the EMF source to determine the “Normal” zone, as indicated by the Green LED
Helpful Hints:
– Record the readings on the enclosed Exposure Log, repeat periodically, since fields can change in strength
– if the GREEN LED(Normal)doesn’t light , the battery is low
– To change the battery remove the two screws,replace 9V battery
Package Included:
1* EMF Meter
1* Manual
